Flexible Numbering Plan; Forced Trunk Disconnect - NEC DS1000 Product Description

Section 3: Features

Flexible Numbering Plan

Forced Trunk Disconnect

50 Section 3: Features
Change the digits users dial
for co-workers and other
features.
For this feature:
Attendant Position
Intercom
Direct Trunk Access
Central Office Calls, Placing
Disconnect a co-worker's
outside call in an
emergency.
also use Forced Trunk Disconnect to release a trunk on which there is no conversation. This can
happen if a trunk does not properly disconnect when the outside party hangs up.
Forced Trunk Disconnect abruptly terminates the active call on the trunk. Only use this
feature in an emergency and when no other trunks are available.
Feature Quick Steps
1. Access busy trunk + Dial # to disconnect the line.
Availability: All versions
The system's Flexible Numbering Plan allows you to change the
digits users dial to reach the attendant, other co-workers and
trunks. The following chart shows the areas of the system num-
ber plan you can change.
You can change the digits a
user dials to:
Reach the system operator(s)
Call a co-worker over the Intercom
Directly access a trunk
Access a Trunk Group
Availability: All versions
Forced Trunk Disconnect allows an extension user to disconnect
(release) another extension's active trunk call. Forced Trunk
Disconnect lets a user access a busy trunk in an emergency,
when no other trunks are available. Maintenance technicians can
CAUTION
DS1000/2000 Product Description
These digits are
normally:
0 or 01-04
300-331
401-416
90-98