Extended Ringing; Extension Hunting; Circular Hunting - NEC DS1000 Product Description

To control the CPRU relay which in turn controls the door strike.

Extended Ringing

Extended Ringing is available with the following features:

Extension Hunting

group member extensions. A call rings in sequence through the hunt group until answered at a
member extension. Extension Hunting is helpful, for example, for a group of co-workers that share
responsibility for answering calls. Each call cycles through the group until an available member
picks it up.
There are three types of Extension Hunting:

Circular Hunting

A Circular Hunting group consists of a group of extensions programmed into a Circular Hunting
list. A call unanswered at a member extension rings the next extension in the programmed list. If
unanswered, the call will continue to cycle through the hunt group. Depending on the hunt type (see
below), Circular Hunting will occur for transferred trunk calls, DILs to a hunt group member, and
ringing Intercom calls. Hunting does not occur for Key Ring and Ring Group calls.
DS1000/2000 Product Description
To open the relay, press FLASH key or OPEN soft key.
To close the relay, Press FLASH key or CLOSE soft key.
Lets calls ring longer than
usual to assist co-workers
that can't readily get to their
phones.
Call Forwarding
A call rings an extension with RNA call forwarding enabled for an extended period before
routing to the forwarded destination.
Direct Inward Line
DILs ring for an extended period before routing to the overflow destination.
Transfer
Transferred trunks ring for an extended period before recalling the transferring extension.
Automatically route calls to
co-workers that work closely
together.
Circular Hunting
Terminal Hunting
Uniform Call Distribution (UCD) Hunting
Section 3: Features
Availability: All versions.
Extended Ringing forces an unanswered call to ring a telephone
an extended number of times before rerouting. This helps users
that cannot get to their phones quickly to pick up calls (such as a
warehouse worker).
Availability: All versions.
• DS2000 U Slot (02.nn.nn) and DS1000 add the UCD
Group Log Out code.
Extension Hunting routes calls to a predefined group of hunt
Section 3: Features
3
47