Table of Contents
Advertisement
Auto reception mode
1.
2.
3.
When a call arrives, the SFX-33 will connect to the line after issuing a set of rings*.
The SFX-33 detects incoming fax signals and automatically
switches into fax receiving
mode after the initial ringing.
**
RECEIVING
**
I
If no fax signal is detected (as in case of vioce calls or manual fax calls) after the first set
of rings, the SFX-33 still connects to the line but does not switch to fax reception
mode
immediately.
Fax reception starts only after a series of simulated
rings** (second set of
rings) are issued by the SFX-33.
What to do if you answer
a fax call:
If you use the handset of SFX-33, fax reception starts automatically.
Replace handset.
If you connect an extension telephone to the SFX-33 through the line plug, you can use
remote reception method to start fax reception without going to the SFX-33. (Press [3]
twice firmly on the extension phone. See page 30.)
In any cases, pressing the [START] key on the SFX-33 will initiate fax reception.
What to do if you answer
a vioce call after the SFX-33 connects
to the line:
When the line connects, the SFX-33 issues a set of simulated
rings"
and then switches into
reception mode with a fax tone.
Lift the handset of the SFX-33, while simulated
rings are provided.
Notes
The SFX-33 is initially set to ring 3 times* before receiving a fax. Using the feature switch
No. 07, you can change this ring delay setting -- how many times the SFX-33 (and your
phones) should ring before turning into fax receiving mode.
The answer delay in the AUTO mode should be left as factory set or if changed should only
be set between 2 rings and 5 rings to ensure ongoing compliance
with Telecom
specifications
for this Telepermitted
equipment.
See page 49-50.
* The number of simulated
rings that sound after the line is connected can be changed to
no rings (position 00) or any number between 3-11
rings. Use the feature switch No. 09.
(See page 49-50.) The SFX-33 is initially set to ring 7 times. If this switch is set to 00, the
SFX-33 does not provide simulated
rings, and answers callers with fax tone after the first
set of rings.
[lMPORTANTl
If you connect an answering
machine to the SFX-33 through the line plug,
do not select the AUTO reception mode. Select the ANSWER mode. (page 29.)
27
Advertisement
Table of Contents
