Reception; Reception Modes - Sanyo SFX-33 Instruction Manual

Facsimile transceiver
Hide thumbs Also See for SFX-33:
Table of Contents

Advertisement

Reception
Reception
modes
The SFX-33 provides 3 reception modes: AUTO, MANUAL and ANSWER.
Each time the
[Rx. MODE] key is pressed, the reception mode changes: AUTO - MANUAL - ANSWER.
The AUTO lamp lights when AUTO mode is set.
The ANSWER lamp lights when ANSWER mode is set.
Neither AUTO or ANSWER lamp lights when MANUAL mode is selected.
AUTO
Receiving faxes is automatic in AUTO mode. No operation is required on the SFX-33 or
other telephones
connected to the SFX-33 through the line plug. Incoming faxes are
received after a set of rings (user - selectable*).
However, if you use a single line for both fax calls and voice calls, you will more likely
answer the phone before the SFX-33 starts receiving a fax. Please read, on the next page,
detailed instructions
on how to receive faxes (or talk to the caller if it is a voice call) when
you answer a call on the SFX-33 or an extension phone connected to the SFX-33 through
the line plug.
1
.
* The SFX-33 is initially set to ring 3 times* before connecting
to the line. You can change
this to the short ring or between 1 and 11 regular rings using the feature switch No. 07.
*
See page 49-50.
MANUAL
Set to this mode if you use the SFX-33 mainly for fax transmission,
and wish to receive
faxes only with your control. Incoming faxes can be received only after you pickup
the
handset.
ANSWER
Use this mode when you connect a telephone
answering machine to the SFX-33 through
the line plug. This allows you to receive both incoming faxes and phone messages while
you are away.
See the next 3 pages for more details of each reception mode.
26

Advertisement

Table of Contents
loading

Table of Contents