Table of Contents
Advertisement
Contrast/Resolution
The SFX-33 allows you to select different contrasthalftone
and resolution modes for fax transmission and copying.
L
Select the most suitable mode for your original documents
after placing the documents in the original slot. You can
e
also set the SFX-33 either to remain in the selected mode
"hmz
-"0
-
~
~ ":H"
[—
until a
nother selection is made, or to return to the default
em m..sr m ..-
mode after each transmission/copying.
06006+
Use the feature switch No. 27 and 28 to switch between
Not return and Return home modes. (See page 49-50.)
II
[CONTRASTl
NORMAL
4
LIGHT
+
HAL~ONE
[RESOLUTION]
STD
4
FINE
*
SUPER FINE
The initial factory setting is in the Not return mode.
For normal contrast documents.
For low contrast documents.
For transmitting or copying halftone documents
(photographs, for example).
When HALFTONE is selected, the resolution mode is
automatically set to FINE.
For text in standard typefaces.
For text with fine type and for drawings.
For text with very small characters ancf/or graphics.
The superfine communication
is possible only with
Sanyo fax models superfine feature and non-Sanyo
models that have ITU-T standard superfine feature.
19
Advertisement
Table of Contents
