Entering Names - Sanyo SFX-33 Instruction Manual

Entering names
Before programming the one-touch, speed dial memory and setting your station name, you
need to know to enter names using number keys and one-touch keys.
The one-touch keys [6], [7] and [8] are used for name programming.
The characters are grouped as shown below:
@@@
Group 1 Group 2 Group 3
ABCDE
abcde
12345
@@@
FGHIJ fghij 67890
KLMNO klmno
.*
.,. ,
PQRST
pqrst +-l&*
@@@
UVWXY Uvwxy # '"()
z z
<>!?=
@@@
Regfh;ion Selection
J
Area
[1— ~+
Cur'sorl cur!sor2
6606
DELETE
The LCD display is divided into 2 sections: The registration area (left) shows the name being
entered, and in the selection area (right), a set of 5 characters appears as you scroll UC) o r down
the display. Each area has a separate cursor.
Selecting a character
1. Use number key [5] to select the desired character group.
The first line of the selected group appears each time the number key [5] is pressed.
2. Use number keys [2] or [8] to scroll up or down the display.
3. Use number keys [4] or [6] to move the cursor 2 over the desired character.
4. Press [ E ] (one-touch key 7) to enter the selected character into registration area. The
cursor 1 moves to the right.
5. Repeat steps 1-4 to finish writing a name.
',
II
m
*
.
.
.
To leave a blank space in the name, press number key [0].
38