Cd Modeselectbutton, Pause, Selectinga Track, Skipping - Sanyo CDF-R800 Operating Instructions Manual

CD mode select button, Pause, Selecting a track, Skipping
CD mode select button
Play / Pause button
1
Track / Skip button
J
CD mode select button
n Press the CD mode select button ( ~ ) to switch immediately to CD mode from
other mode (Radio, Changer, Power off mode).
Note:
. This button is not effective when a CD has not been inserted in the unit.
Pause
II
Press the Play/Pause button ( fi ) during CD play to stop CD play temporarily.
To resume play from the point at which play was stopped, press the button again.
Note:
If the unit is left in the Pause mode for more than 5 minutes, the power will switch
off automatically.
Selecting a track
o
Pressing the ( + ) or ( m ) side of the Track/ Skip button ( '*'C'*), select a track.
Skipp
Desired Track Press this side.
Next Track
m
Current Track
(from the beginning)
+4
Preceding Track
+
(twice successively)
lng
o
Press and hold the ( 44 ) or ( w ) side of the Track/ Skip button ( 'SEEK*)for 1.5
seconds or more to advance quickly in the forward or backward direction. When the
button is released, this function stops
Note:
When it reaches to the end or the beginning of the disc, the unit enters Pause mode.
12