Cd Operation - Sanyo FXC-503LD Operating Instructions Manual

To scan programmed stations . . . See
l
Notes
If no station can be received, "- - -I' will appear in the display, The system will tune
l
into the station which was being received before the ATP function was selected.
stations and start receiving the one memorized first.
PRESET-SCAN-BUTTON OPERATION . . . . . . . 5
This function scans each of the preset stations stored in the selected band (both manual presets and auto travel
presets).
q
To scan . . . . .
l
press button @ for less than 0.5 seconds for ATP mode.
q
Press button 0. The system will sequentially receive each preset station for 5 seconds.
q
To hold the station, press button @ again during this five second period.
SWITCHING BETWEEN LOCAL STATIONS
AND DISTANT STATIONS (DX) . . . . . . . . . .'. . . . . . . . . . . . . . .6
Each time button @I is pressed (for less than 0.5 seconds), the search stop sensitivity will be switched between
local and distant stations.
To receive local stations (strong signals) . . . . . . . . . . . . . . . . press the button to turn off "DX" in the display.
l
Distant stations (weak signals) . . . . . . . . . . . . . . . . . . . . . .
l

CD OPERATION

FXC-503LD WORKS IN CONJUNCTION WITH SANYO CD CHANGER (FXD-ClOO/FXD-
SELECTING CD MODE
Press button @ to switch from radio or tape mode to CD mode.
PUTTING THE CD IN PAUSE MODE . . . . . . . . . . 1
While playing a CD press button 0 ; the player is in pause mode.
To resume playing, press button 0 again.
Quick Tuning of ATP Stations
Select the desired band.
l
Press button @ if the "AS" indicator does not appear in the display.
l
Press preset button @ to select the desired ATP preset. If a total of
l
six stations cannot be preset u- - -'I will be displayed for the empty
channels.
"PRESET-SCAN-BUTTON
Select the desired band or ATP mode. Press button @for FMl, FM2, MW or LW band, or
OPERATION".
press the button to turn on "DX" in the display.
9