Table of Contents
Advertisement
Getting started
Updating the firmware on your BizIP 410 telephones
HiPath BizIP is continuously under development. For this reason, you
should update the firmware on the BizIP 410 telephones before using
them for the first time. Proceed as follows:
1. Start up HiPath BizIP with all connected telephones
2. Open the HiPath BizIP administration interface
3. Enter the following data (if not already specified):
4. Click Submit. Once you have done this, all phones will be updated
Further information on updating HiPath BizIP is available starting on
Page 88.
24
sure that a connection to the Internet exists.
and click
> System-wide Settings > FTP Downloads - All Phones
– FTP Server Address: 194.138.17 .200 (or bizip.siemens.com)
– FTP user name: (empty
– FTP password: (empty)
– FTP path: HiPath_BizIP1.0
– Application download filename - Adv: 410a.app
– Application download filename - Eco: 410e.app
– Action on submit: Download application
within a few minutes.
Page 13. En-
Page 18 on the PC
Advertisement
Table of Contents
