Security for your HiPath BizIP
Configuring the DMZ host
A DMZ host is only required if access from the Internet is required irre-
spective of the service/port used.
Data required
•
Administration on the PC
Web > Connectivity Settings > Firewall > DMZ Host
Configuring a DMZ
1. First activate the status of the DMZ function by clicking Enabled.
2. Enter the IP address of the DMZ host in the LAN to which unknown
3. Click Apply to apply your changes.
64
The activation of a DMZ host can give rise to a potential gap in the
firewall security of your HiPath BizIP. You should only activate this
function if you are experienced in setting up firewalls.
IP address of the target in the LAN (
data/requests are to be forwarded in the IP Address fields.
DMZ host).