Table of Contents
Advertisement
Security for your HiPath BizIP
Configuring a firewall
The firewall of your HiPath BizIP offers the best possible protection, for ex-
ample through the use of
7
IP filter
In the standard configuration the firewall is configured as follows:
•
•
Data required
•
•
•
Administration on the PC
Web > Connectivity Settings > Firewall > IP Filters
Adjusting the firewall
•
•
•
60
Avoid making changes to the standard settings unless absolutely
necessary!
Incorrect settings cause Internet and VoIP links to fail. The firewall
function can be strengthened significantly or deactivated by creat-
ing filter rules.
Ping response on the WAN port: Deactivated
IP filter: Activated
Protocol types
IP addresses
Port numbers
Activating the option WAN Port Ping Reply enables the WAN port (IP
address of the BizIP AD 20 on the WAN side) to be found from the In-
ternet ("pinged").
Deactivating the IP Filtering option deactivates the firewall. You are
completely unprotected from attacks from the Internet.
Set up new filter rules as required:
1. Select the Traffic Direction for which the new filter rule is to apply.
2. Click Add New Filtering Rule
3. Under Protocol select the IP protocol for which the filter rule is to ap-
ply.
Stateful Inspection.
Advertisement
Table of Contents
