Plasma Air Deodorization; Off Timer Operation - Mitsubishi Electric MA-EF503HS-U Instruction Manual

Plasma air deodorization

The unit uses the odor sensor to monitor the level of air pollution, then automatically activates the Plasma to break up odor ingredients in the air.
You can turn the Plasma deodorization function ON or OFF.
POWER
AUTO FAN
PLASMA TIMER
Each time you press this button, the Plasma unit
turns ON or OFF.
Turn the Plasma deodorization lamp ON.
The unit will return to the previously set operation
mode when power is interrupted.

Off TIMER operation

On the main unit
You can set the unit so that it turns off after running
for a preset time. (1, 2, 4 hours)
HOUR MIN LOW MED HIGH MAX
TIMER FAN
TIMER
Press
The remaining operation time can be changed.
beep beep beep
beeep
Continuous
Operation
(Lamp off)
The selected Off TIMER lamp lights.
The Off TIMER lamp will display the remaining
operation time and will switch as time passes.
Using the remote controller
OFF
ON
beeep
beep
PLASMA
Press
POLLEN
GUARD
NORMAL
POWER
ON/OFF
AUTO
HOUR
Since the unit operates intermittently during the
Plasma deodorization, a hissing noise may be
heard, and the unit may also stop at times. If
the noise becomes irritating, turn off the feature
by pressing the PLASMA button on the remote
control.
When the Plasma deodorization lamp is
blinking, turn the unit off, and clean the Plasma
unit.
13
To operate from the main unit, you can turn the
Plasma deodorization ON or OFF using the
following procedure:
When the power is turned on, press and hold
the AUTO button, and press the POWER
switch.
Using the remote controller
You can also use the remote controller to
set/deactivate the off TIMER. The operation is the
same as on the main unit.
POWER
AUTO FAN
PLASMA TIMER
TIMER
Press
11