Replacing The Filters - Mitsubishi Electric MA-EF503HS-U Instruction Manual

Maintenance (continued)
The filter replacement lamp notifies you of the replacement period of the HEPA filter and the activated charcoal filter.
Replace both the HEPA filter and the activated charcoal filter at the same time.
Replacement period
Although the replacement period depends on
the usage environment and conditions, the
lamp will light after approximately 5 years
when using the unit on constant MIN fan
speed.
(In the case of MAX, the lamp will light in
approximately 1/4 the time.)
When the filter replacement lamp illuminates
When the HEPA filter becomes dirty and the
color is about the same as that indicated on
the label
Color of cigarette ingredients
Color of household dust
Please replace the HEPA filter and the activated charcoal
filter with new filters when the color on the surface of the
HEPA filter matches the color indicated above.
The service life of the filters varies depending
on the usage environment, and conditions.
The HEPA filter and the activated charcoal filter
cannot be reused. Always replace old filters
with new filters.
When smoking large amount of cigarettes, odor
may adhere to the filter and main unit. In this
case, clean the main unit, and replace the filters.
Separately sold part:
Replacement filter set
(HEPA filter/activated charcoal filter)
Model
Code no. 5D4 C06
To order parts, contact your dealer of purchase
or Mitsubishi Electric @ www.plasmapure.com
14

Replacing the filters

REPLACE FILTERS
Available from Mitsubishi Electric
www.plasmapure.com
Reset Switch
MAPR-E837HFT
1
Remove the intake grill and the
HEPA filter.
2
Remove the Plasma unit.
3
Replace the activated charcoal
filter.
Set vertically.
(There is no front or back.)
4
Replace the Plasma unit and
mount a new HEPA filter.
5
Insert the power plug and press
the Reset Switch.
Reset switch
6
Replace the intake grill.
12~13
Beep
Use a ball point pen,
or a similar pointed
object, and press
until a beep is heard.