Changing The Airflow - Mitsubishi Electric MA-EF503HS-U Instruction Manual

Changing the airflow

You can select between FAN (manual) and AUTO operation modes.
On the main unit
You can select from 5 airflow volumes or AUTO.
HOUR MIN LOW MED HIGH MAX
TIMER FAN
FAN
FAN
You can select
from 5 airflow
volumes.
AUTO
You can select
from POLLEN
GUARD and
NORMAL.
The unit will return to the previously set mode even after turning the unit off.
The unit will return to the previously set mode even when reinserting the power plug or after having a power failure.
10
POLLEN
GUARD NORMAL
POWER
ON/OFF
AUTO
AUTO
Press
one of the buttons
The airflow changes each time
the button is pressed, and the
lamp of the chosen volume lights
up.
beep
MIN LOW MED HIGH MAX
Operation switches every time
the button is pressed, and the
selected operation mode lamp
lights.
Operation is automatically
adjusted to the appropriate
airflow volume according to the
odor monitor, microdust monitor,
and pollen monitor.
beep
POLLEN
GUARD
Using the remote controller
You can select the airflow volume from the
remote controller. The operation is the same as
with the main unit.
POWER
AUTO
PLASMA
When sleeping
When house cleaning
beep
POLLEN GUARD
The sensor is set to
supersensitive to react to even the
slightest traces of pollen.
The fan speed is faster than the
NORMAL operation for easier
intake of large particles such as
pollen, etc.
NORMAL
The level of air pollution in the
room is monitored using the odor
and dust sensors, and the
NORMAL
appropriate airflow volume is
automatically selected.
When the air is clean, the fan will
stop.
FAN
AUTO
TIMER
Press
one of the buttons
MIN or LOW
HIGH or MAX
FAN