Table of Contents
Advertisement
2.1
INSTALLATION
To install the HRAM in the HORIZON, hold the memory
board in one hand and touch the metal chassis of the
HORIZON with the other hand as shown in Figure 2-2.
This will eliminate any difference in static potential
between the memory board and the computer.
Hold the board by both edges, with the component side
of the board toward the front of the computer. Slide
the board into any empty slot in the HORIZON as shown
in Figure 2-3.
The row of metallic strips, or "fingers" on the bottom
of the board should f it into the connector at the
base of the card slot. Press firmly on the top of the
memory board until the board is firmly seated in the
connector.
HRAM
Discharging Static Electricity
Figure 2-2
Installing the HRAM
Figure 2-3
USER/TECHNICAL MANUAL
Advertisement
Table of Contents
