Feature Guide References
1.2.2.7 Log-in/Log-out
Malicious Call Identification (MCID)
•
4.8 [2-6-1] Numbering Plan—Main—Features—
Feature Guide References
1.21.1.9 Malicious Call Identification (MCID)
Manager Features
•
4.11 [2-7-1] Class of Service—COS Settings—Programming & Manager—
•
13.1 [11-1] Main—Password—
Feature Guide References
2.2.6 Manager Features
Message Waiting
•
3.4 [1-1] Slot—Card Property - Extension Type—
KX-TDA600 only)
•
4.8 [2-6-1] Numbering Plan—Main—Features—
•
4.10 [2-6-3] Numbering Plan—B/NA DND Call Feature—
•
4.17 [2-9] System Options
–
Option 3—
–
Option 5—
•
5.22 [3-8-1] VM(DTMF) Group—System Settings—
•
6.1 [4-1-1] Wired Extension—Extension Settings—Option 8—
KX-TDA200/KX-TDA600 only)
•
6.5 [4-1-4] Wired Extension—Flexible Button—
•
6.13 [4-2-3] Portable Station—Flexible Button—
•
6.17 [4-3] DSS Console—
Feature Guide References
1.19.1 Message Waiting
Multiple Subscriber Number (MSN) Ringing Service
•
12.2 [10-2] DIL Table & Port Settings—DDI / DID / TIE / MSN
–
Distribution Method
–
DDI/DID/TIE/MSN—Remove Digit
–
DDI/DID/TIE/MSN—Additional Dial
•
12.6 [10-4] MSN Table
Manager Password - PT Programming—Prog *1
Dial Tone—Distinctive Dial Tone
SLT—Message Waiting Lamp Pattern (KX-TDA100/KX-TDA200/KX-TDA600 only)
Type
14.2 Feature Programming References
MCID
SLT Power Supply (KX-TDA100/KX-TDA200/
Message Waiting Set / Cancel / Call Back
Message Waiting Set
VM DTMF Command—Listening Message
SLT MW Mode (KX-TDA100/
Type
Type
Manager
PC Programming Manual
893