Panasonic KX-TDA100 Programming Manual page 18

1.2.1 Installing and Starting the Maintenance Console
•
Remote Maintenance Dial Number. Enter the complete telephone number of the PBX (including the country
code). When necessary, this number will be used to access the PBX from a remote location for
maintenance purposes.
18 PC Programming Manual
1. Connect the PC to the PBX with a USB cable.
2. Start Maintenance Console from the Start menu.
3. "Information before programming" appears.
a.
Carefully read this important additional information,
which includes updates to this and other manuals.
b.
Click OK to close this window.
4. a.
Enter the Installer Level Programmer Code (default:
INSTALLER).
The Programmer Code authorises different
programming levels, and the Quick Setup is only
available when you start the Maintenance Console with
the Installer Level Programmer Code.
Note
There are 2 other Programmer Codes with limited
authorisation: Administrator Level (default:
ADMIN), and User Level (default: USER). (®
1.2.2 Password Security)
b.
Click OK.
5. Click Connect.
6. Select your PBX model from PBX Model.
7. a.
Select the USB tab.
b.
Enter the system password for installer (default: 1234).
c.
Click Connect.
Note
To connect to the PBX via USB, the KX-TDA USB driver
must be installed on the PC, as explained above
in "Installing the Maintenance Console".