Panasonic KX-TDA100 Programming Manual page 847

Value Range
Max. 30 characters
Maintenance Console Location
13.1 [11-1] Main
Programming Manual References
None
Feature Guide References
2.3.1 PC Programming
External Modem Command—Manual Initialisation 1–Manual Initialisation 5
Specifies the command to manually initialise an external modem. The command specified here is controlled
by PT system programming (External Modem Control [801]).
Value Range
Max. 30 characters
Maintenance Console Location
13.1 [11-1] Main
Programming Manual References
None
Feature Guide References
2.3.1 PC Programming
Maintenance
Local Alarm Display—Extension 1, Extension 2
Specifies the extension numbers of PTs that will be notified by the PBX about local alarms. When the PBX
detects a PBX error, the System Alarm button on the PT turns on red. When this button is pressed, the display
will show the error number, and the button light will turn off automatically.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
13.1 [11-1] Main
13.1 [11-1] Main
PC Programming Manual 847