System Feature Descriptions - Samsung DCS Compact II General Description Manual

DCS Compact II General Description

4.2 System Feature Descriptions

Account Code Entry
Station users may enter an account code (maximum 12 digits) before hanging
up from a call. This account code will appear in the last column of the SMDR
printout for that call record. Keyset users may enter this code using an account
(ACCT) key without interrupting a conversation. Single line telephone users
must temporarily interrupt the call by hook–flashing and dialing the feature
access code. Account codes can be up to 12 digits long.
l
l
All Call Voice Page
Users can page all the internal and all the external paging zones at the same
time by dialing the All Page code. Keysets may be restricted from making or
receiving pages in system programming. A maximum of 40 keysets can be
programmed to receive page announcements.
Attention Tone
To get your attention, a brief tone precedes all page announcements or intercom
voice calls. There are separate programmable duration timers for page and voice
announce tones.
Authorization Codes
Authorization codes are used to give permission to make a call. These four digit
authorization codes can be either forced or voluntary. When used, authorization
codes will automatically change the dialing station's class of service to the level
assigned to the authorization code. Authorization codes may or may not be
programmed to print on SMDR.
Forced
When forced, account codes are always verified from a system list of 200
entries. Account codes are always printed on the SMDR report. They can
contain digits 0–9.
Voluntary
Users may elect to enter an account code for any call. Digits can include 0–
9, star (*) and #.
4-2
Chapter 4. Features