System Feature Descriptions - Samsung DCS Compact User Manual

4.1 SYSTEM FEATURE DESCRIPTIONS

ACCOUNT CODE ENTRY
Station users may enter an account code (maximum 12 digits) before hanging up from
a call. This account code will appear in the SMDR printout for that call record. Keyset
users may enter this code using an account (ACCT) key without interrupting a conver-
sation. Single line set users must temporarily interrupt the call by hook-flashing and
dialing the feature access code. Account codes can be up to 12 digits long. Characters
can include the digits 0–9.
FORCED
When forced, they are always verified from a system list of 250 entries. Account codes
are always printed on the SMDR report. Account codes can be up to 12 digits long.
They can contain the digits 0–9.
VOLUNTARY
Users may elect to enter an account code for any call. Characters can include the
digits 0–9, star (3) and #.
ALL CALL VOICE PAGE
Users can page all the internal and all the external paging zones at the same time by
dialing the All Page code. Keysets may be restricted from making or receiving pages in
system programming. A maximum of 30 keysets can be programmed to receive page
announcements.
ATTENTION TONE
To get your attention, a brief tone precedes all page announcements or intercom voice
calls. There are separate programmable duration timers for page and voice announce
tones.
AUTHORIZATION CODES
Authorization codes are used to give permission to make a call. These four digit autho-
rization codes can be either forced or voluntary. When used, authorization codes will
automatically change the dialing station's class of service to the level assigned to the
authorization code. Authorization codes may or may not be programmed to print on
SMDR.
FORCED
When a station is programmed for forced authorization the user must always enter this
code before dialing is allowed. The dialed authorization code is verified from a system
list of 100 entries.
4.1.2
CONTENTS