Chain Dialing; Class Of Service; Next Call - Samsung DCS Compact II General Description Manual

DCS Compact II General Description
Call Waiting/Camp–On
Busy stations are notified that a call is waiting (camped–on) when they receive a
tone. The tone will be repeated at a programmable interval. Keysets receive an
off–hook ring signal through the speaker and single line stations receive a tone
in the handset. The volume of the camp–on tone can be set by the station user.
Camped–on calls will follow Forward No Answer if a Forward No Answer
destination has been set.

Chain Dialing

Station users may manually dial additional digits following a speed dial call or
chain together as many speed dial numbers as are required.

Class of Service

The system allows a maximum of 30 station classes of service. Each class of
service can be customized in memory to allow or deny access to features and to
define a station's dialing class. Each station can be assigned different classes of
service for day and night operation.
CLIP (Calling Line Identification Presentation)
The CLIP feature is dependent on having a LCD keyset to show the name or
number in the top line of the display.
l
l
l
l
Name/Number Display
Each LCD keyset user can decide if he/she wants to see the CLIP name or
CLIP number in the display. Regardless of which one is selected to be seen
first, the NND key is pressed to view the other pieces of CLIP information.

Next Call

In the event that you have a call waiting or a camped–on call at your
keyset, you can press the NEXT key to display the CLIP information
associated with this next call in queue at your station. Either the CLIP
name or CLIP number will show in the display depending on your NND
selection.
Save CLIP Number
At any time during an incoming call that provides CLIP information, you
may press the SAVE key. This saves the CLIP number in the Save Number
feature. Pressing the SAVE number redial key will dial the CLIP number.
Store CLIP Number
4-6
Chapter 4. Features