Samsung DCS Compact II General Description Manual page 14

DCS Compact II General Description
3 TRK card
The 3 TRK card provides three loop start C.O. interfaces with optional Caller ID
relays.
interface contains an interface for MPD or PRS which is optional. The MPD or
PRS hybrid chips of the DCS system can be used.
6 TRK card
The 6 TRK card provides six loop start C.O. interfaces. The first two C.O.
interfaces are equipped with PFT relays. Each interface contains an interface for
MPD or PRS which is optional. The MPD or PRS hybrid chips of the DCS system
can be used.
4 BRI card
The 4 BRI card contains four Basic Rate access ports, i.e. eight ISDN channels.
Protocol is compatible for Euro–ISDN BRI. For S0 application, power feeding to
ports is selectable by programming.
2 BRI card
The 2 BRI card contains two Basic Rate access ports, i.e. four ISDN channels.
Protocol is compatible for Euro–ISDN BRI. For S0 application, power feeding to
ports is selectable by programming.
PRI card
The PRI card contains one Primary Rate access ports, i.e. thirty ISDN channels.
Protocol is compatible for Euro–ISDN PRI.
8 DLI card
The 8 DLI card provides eight DLI ports.
8 SLI card
The 8 SLI card provides eight SLI ports for industry–standard single line
telephones and the ability to provide a loop disconnect signal. Please note that
this card does not provide Long Line protection.
The first two C.O. interfaces are equipped with PFT relays.
Chapter 2. Hardware Descriptions
(KP70D–B3T/)
(KP70D–B6T/)
(KP70D–B4B/)
(KP70D–B2B/)
(KP70D–BP/)
(KP70D–B8D/)
(KP70D–B8S/)
2-3
Each