GE DVSR xU User Manual page 97

DVSR xU User Manual
Figure 66: The System View menu
2. Go to OK and press Enter or left-click the mouse to return to the System menu.
3. Press ESC or right-click the mouse to return to the main menu.
To power off
1. In the System menu go to the Shut Down DVSR edit box and press Enter or left-click the mouse.
Press OK to confirm. The DVSR xU will turn off.
Note: If you turn off the power by pressing the POWER button on the front panel, and the PIN enable option
has been enabled in the Display menu (see page32), you will need to enter your PIN before the DVSR xU will
turn off.
To acknowledge an alarm
1. In the System menu go to the Alarm Output stop box and press Enter or left-click the mouse.
Note: This option applies only when Alarm Output has been set to manual (see section To setup an external
alarm output on page 67.)
2. Press ESC or right-click the mouse to return to the main menu.
93