GE DVSR xU User Manual page 69

DVSR xU User Manual
Figure 46: Alarm Input Rules submenu
b. Select the cameras from which you want to record an alarm input. Press Enter or left-click the
mouse to enable () or to disable the camera channel.
Caution: For a channel to be able to record an alarm, the recording option and the record
type must first be enabled in the Record Schedule menu, such as Alarm or one of the other
options available. See section To setup a camera's recording schedule on page 53 for further
information.
c. Under Alarm Schedule select the schedule for when the DVSR xU will respond to an external
alarm.
Select the day of the week and then for Period 1 enter the start and end time periods for the
selected day. Each day can have up to four time periods.
Note: The time format is 24-hour.
d. Select how the alarm should be indicated. Enable or disable each option by pressing Enter or
left-clicking the mouse. See Table 17.
Table 17: Alarm indications
Alarm Out
Buzzer
TCP
Full Screen
Email
e. Select OK and press Enter to return to the Alarms menu, or press CANCEL or ESC to abort and
return to the Alarm menu.
When enabled, the Alarm Out is activated. Up to four alarm outputs can be enabled.
An audible alarm sounds.
The alarm information is sent to the remote IP (see section To change the IP address
on page 57) .
On Alarm channel will be displayed in full screen.
The alarm information is sent to an Email address (see section To setup E-mail
notification on page 58) .
65