GE DVSR xU User Manual page 37

DVSR xU User Manual
To setup the VGA interface
You can define the VGA resolution and refresh frequency.
1. In the Display menu go to the Menu Transparency list box and press Enter or left-click the mouse.
Select one of the options available:

1280*1024@60 Hz

1024*768@60 Hz (default)

800*600@60 Hz
To set the system time and date
You can setup the DVSR xU date and time as well as the Daylight Saving Time (DST). This is the date
and time that will appear on screen. You can setup when DST for the DVSR starts and stops in the
year. It is deactivated by default.
1. In the Display menu go to the Time & Date setup button and press Enter or left-click the mouse.
The Time & date submenu appears.
2. Go to the Date edit box and press Enter or left-click the mouse and use the number buttons to
enter the date. The default date format is dd-mm-yyyy.
3. Go to the Time edit box and use the number buttons to enter the time. The time format is 24-hour
format as hh-mm-ss.
4. Go to the Enable Daylight Savings check box and press Enter or left-click the mouse to enable.
Once enabled, the dates become active.
5. Select the month and day when Daylight Savings starts and stops.
8. Go to OK and press Enter or left-click the mouse to confirm the changes and return to the Display
menu.
To change live view layout
1. In the Display menu go to Multi Screen setup button and press Enter or left-click the mouse. The
Multi Screen menu appears. See Figure 26.
33