GE DVSR xU User Manual page 22

18
5. If you want to search for video from a particular ATM, for example, go to Text and press Enter or
left-click the mouse to activate (). In the edit box alongside the check box type the text to be
searched (for example, the text that appears on an ATM screen.)
Front panel or remote
control
Mouse
6. Go to Search and press Enter or left-click the mouse to start the search.
When the search is completed a list of all the files found appears. The list may extend over several
pages. The most recent file is listed first. See Figure 15 for an example of a search result.
Figure 15: Example of a search result
Note: If you get a message saying that there are no recordings but you were expecting some to be listed,
check that you have selected the correct recorded file type option for your search.
7. Press ESC or right-click the mouse to quit playback mode and return to live mode.
To playback a recorded file
1. Search for the files you want to playback. See section To search for recorded video on page 17.
2. In playback mode (see Figure 15 on page 18) there are three ways to playback a recorded file:
a. Select Play. The system will play each file listed, starting with the first file.
— or —
b. In the search window select the video file you want to play and press Enter or left-click the
mouse. Only the selected file will be played back.
— or —
c. Select Instant Replay and press Enter or left-click the mouse. The system will play the last 5
minutes recorded by the selected camera.
Press EDIT. Press A to change the type of character to be entered, which is shown
on the bottom of the screen. Use the alphanumeric buttons to enter the text. Press
Enter when completed.
Click the edit box and select the text from the onscreen alphanumeric list that
appears.
DVSR xU User Manual