GE DVSR xU User Manual page 63

DVSR xU User Manual
4. Go to the Password edit box and press EDIT or left-click the mouse. Enter the e-mail account
password. If using the front panel or remote control, press Enter to accept the changes.
5. Go to the Sender Name edit box and press EDIT or left-click the mouse. Enter the name of the
person sending the e-mail. If using the front panel or remote control, press Enter to accept the
changes.
6. Go to the Sender Address edit box and press EDIT or left-click the mouse. Enter the e-mail address
of the sender. If using the front panel or remote control, press Enter to accept the changes.
7. Go to the Email Server edit box and press EDIT or left-click the mouse. Enter the SMTP server
address. If using the front panel or remote control, press Enter to accept the changes.
8. You can send e-mail notifications to up to two addresses. In the Mail Receiver No. list box select
whether Receiver Number 1 or 2 will receive the notification. Depending on which is selected, the
Name and Address numbers will automatically change.
9. Go to the Name edit box and press EDIT or left-click the mouse Enter the name of the receiver
that should appear in Email as the receiver. If using the front panel or remote control, press Enter
to accept the changes.
10. Go to the Address edit box and press EDIT or left-click the mouse. Enter the e-mail address of the
receiver. If using the front panel or remote control, press Enter to accept the changes.
11. Repeat steps 8 to 10 if there is a second receiver.
12. You can send a JPEG attachment with the e-mail. Go to Attachment and press Enter or left-click
the mouse to enable () the check box. The JPEG Capture Interval list box becomes activated.
13. The unit can send five jpeg images of a recording with the e-mail. You need to define the capture
interval in seconds between each jpeg. Select the capture interval from the list.
Note: Check with your ISP or IT department for details on mail server and mail server login.
14. Select OK to return to the Network menu.
To setup the Advanced IP settings
1. In the Network menu go to the Advanced Settings setup box and press Enter or left-click the
mouse. The Advanced Settings submenu appears. See Figure 43.
The MAC Address edit box shows the MAC address of the DVSR xU unit.
59