Table of Contents
Advertisement
12. Re-fit the top plate (14) and put the
two screws into the top front plastic
trim (15)
13. Put the two screws back into the
top plate (16)
14. Put the pin on the upper wall
(17). Take the 4-star compartment
cover(18). Put the hinge (19) and the
locking mechanism in place (20). Put
the caps in to the holes (21&22)
15. To refit the door, locate the top
hinge in the door, attach to the cabinet
and hold the door (23).
16. Fit the bottom hinge (24). If
necessary adjust and then tighten the
bolts. Ensure, that the door opens
and closes easily and that there are
no gaps allowing air into the cabinet. If
there are gaps between the door seal
and the cabinet, adjust the door seal
by gently pulling away from the door
using fingers.
17. Fit the other front feet (25).
18. Carefully stand your appliance.
(You may need somebody to help you.)
Adjust the front feet (See
Installation Instructions)
19. Put back all, loose items and
fittings.
20. Wait for at least 4 hours to allow
the system to settle before switching
on.
Spare plastic parts supplied with
the appliance are for your future use
during door repositioning.
21. Fit the door handle to the opposite
side of the door and tighten
the bolts. (26).
11
EN
Advertisement
Table of Contents
