Table of Contents
Advertisement
The appliance is supplied right-hand
hinged. If left hand door hinging is
required, follow the instructions below.
To change the door hinging you will
need the following tools:
Two people are needed for
changing the door hinging. The
glass door is very heavy (approx.
30 kg) and could break.
To protect the appliance door and your
floor from damage whilst changing the
door hinging,
^ spread a suitable covering on the
floor in front of the appliance.
Take care not to damage the door
seal.
If the door seal is damaged, the
door will not close properly and
cooling will be impaired.
Changing the door hinging
Removing the door
^ Open the appliance door as far as it
will go.
^ Use a flat-bladed screwdriver to
remove cover a.
^ Fit red restraining clip b (supplied
with the appliance) onto soft-close
mechanism c.
The restraining clip stops the hinge
from snapping shut. Do not remove the
clip until told to do so.
^ Push hinge pin d up and out from
underneath.
The soft-close mechanism is now no
longer fixed to the appliance.
55
Hide quick links:
Advertisement
Table of Contents
