Changing The Door Hinging - Miele KWT 6321 UG Operating And Installation Instructions

Changing the door hinging

The door hinging should be changed
by authorised service personnel only.
Two people are needed for changing
the door hinging.
This appliance is delivered with
right-hand door hinging. If you wish to
use left-hand hinging, the hinges must
be changed:
Spread a suitable covering on the
floor in front of the appliance to
protect the glass door.
^ Use a screwdriver to remove the
covers a.
,
The second person must hold
the door firmly.
Caution! During the following
procedure the appliance door is no
longer secured once the screws on
the retaining brackets have been
loosened.
^ Unscrew the screws on the retaining
brackets. Start with the bottom
42
screws b and then unscrew the top
screws c.
^ Remove the appliance door d.
^ Place the door on a stable surface
with the outer side facing upwards.