Adjusting The Door Hinges; Changing The Door Hinging - Miele KWT 6312 UGS Operating And Installation Instructions

Adjusting the door hinges

The door hinges on the wine condition-
ing unit are set ex-works to enable the
appliance door to be opened wide.
However if the opening angle of the ap-
pliance door needs to be limited for any
reason, the hinge can be adjusted to
accommodate this.
If the appliance door hits an adjacent
wall when opened, for example, the
opening angle can be limited to approx.
90°.
The locking pins for limiting the door
opening must be fitted before the
wine conditioning unit is installed.
 Insert the locking pins supplied for
limiting the door opening into the
hinges from above.
The appliance door opening angle is
now limited to approx. 90°.

Changing the door hinging

The wine unit is supplied right-hand
hinged. If left-hand hinging is required,
the hinges must be changed.
To change the door hinging, you will
need the following tools:

Danger of injury and damage to
the appliance.
The glass door is breakable!
The glass door is heavy. It is essen-
tial that all hinge-changing work is
carried out by two people.

Danger of injury and damage to
the appliance.
The glass door can drop!
When changing the door hinging
make sure that all fixing parts are se-
curely screwed into position.
 Place a suitable cover on the floor in
front of the wine unit to protect the
glass door and your floor from dam-
age when changing the hinging.
Be careful not to damage the door
seal. If the door seal is damaged, the
appliance door may not close prop-
erly and cooling will be insufficient.
Installation
63