Sanyo PLC-XP200L Service Manual page 37

Optical Parts Disassembly
5 Optical base top removal
Before taking this procedure, remove cabinet top, main board following to the
chapter "Mechanical disassembly".
1 Remove 1 screw A (M3x6) on the thermal protector, 1 screw B (T3x10) on
the ballast trigger and 5 screws C (T3x10).
 Unhook 4 hooks D on the optical base top and take the optical base top
upward off.
Ballast trigger
d
c
c
c
-37-
B
A
c
c
Thermal pro-
tector
d