Ballast Box Removal; Ballast Box Disassembly - Sanyo PLC-XP200L Service Manual

Mechanical Disassembly

7 Ballast box removal

1 Remove 1 screw A (M3x6) and disconnect the lamp
ballast socket.
 Remove 1 screw B (T3x10) and take the ballast trigger
off.
3 Remove 1 screw C (M4x8) and pull the ballast box
backward and remove it off.

7-1 Ballast box disassembly

1 Remove  screws D (M3x6) and take the shield case
top off
 Remove ballast board from the shield case bottom.
A
c
Isolation sheet
Ballast board
-3-
B