Power Box Removal; Power Box Disassembly - Sanyo PLC-XP200L Service Manual

Mechanical Disassembly

6 Power Box removal

1 Remove the 3 covers A and B on the cabinet.
 Remove 1 screw C (M3x6) and take thermal protector
(SW905) off
3 Disconnect the socket D (K6B) on the power board.
4 Remove  screws E (M4x8) and take the power box
upward off.

6-1 Power box disassembly

1 Remove 6 screws F (M3x6) and take the power box
cover off.
 Remove 5 screws G (M3x6), 1 screw H (M4x8), 
screws J (M.8x4) and take the power board off.
J
H
Isolation sheet
Power board
Thermal protector
(SW905)
Note: Mount as the printed
mark comes up side.
G
G
F
F
e
d
B
A
Isolation sheet
Isolation sheet
G
G
G
F
F
--
e
Thermal protec-
c
tor (SW905)
Note:
The isolation sheet must be placed
as shown in the figure above.
F
F