Sanyo PLC-XP200L Service Manual page 20

Mechanical Disassembly
3-1 Control board and fan (FN907) disassembly
1 Remove  screws B (M3x6) and take the control board/
button holder off
 Unhook  hooks C on the button holder and take the con-
trol board off.
3 Remove  screws D (M3x10) and take fan (FN907) off.
Control buttons
Control board
4 Main board removal
1 Remove  screws A (M3x6) and take the prism shield
cover top off.
 Remove 6 screws B (M3x6) and take the main shield cover
top off.
3 Remove 1 screw C (M3x6) and take the main board off.
4 Remove  screws D (M3x6) and take the main shield cov-
er bottom off.
c
c
B
B
B
d
-0-
FN907
d
d
B
B
B
B
A
A
c
d
B
Main
board