Operating Instructions
®
Busch-Welcome
Pos: 39 /#Neustruktur#/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/2. Ebene/M - O/Konfigurationsseite "Grundeinstellungen" @ 34\mod_1362494927689_15.docx @ 284645 @ 111111111111111111111111111111111111111111111111111111111112111111112111111111111111111112222222222222222222222222222222222211111111111111 @ 1
6.5
"Basic settings" configuration page
Pos: 40 /#Neustruktur#/Online-Dokumentation (+KNX)/Bedienung/Türkommunikation/Busch-Welcome/Menü Grundeinstellungen - 83341 @ 35\mod_1363612329100_15.docx @ 288694 @ 23333333333311112211111111211111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111232223322222222222222 @ 1
Fig. 8:
"Basic settings" configuration page
You can adjust the basic settings for the IP gateway on the "Basic settings" configuration page.
Address of the indoor station
The address of the indoor station indicates which call button on the outdoor station is used to control the IP
gateway.
Note
Up to 4 mobile terminal devices and Busch-ComfortTouch
Default outdoor station
The address of the default outdoor station is the station set as the preferred outdoor station. One audio and video
connection also without incoming door call can be set up for this station.
Master / slave mode
When more that one indoor station is installed in the apartment (same addresses), one station must be configured
as master and others as slave.
Pos: 41 /#Neustruktur#/Online-Dokumentation (+KNX)/Steuermodule - Online-Dokumentation (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_1268898668093_0.docx @ 52149 @ 22222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222121112222222222222121112222222222222222222222232223322222222222222 @ 1
Operating Instructions | 1473-1-8354
Configuration
®
can be connected to a call button.
— 16 —