Miscellaneous - Medisana HGN User Manual

6.1 The battery change symbol
Troubleshooting • The batteries are too low or empty. Replace both batteries with new 1.5 V AAA LRO3 batteries.
Erratic measurements being displayed
• Cuff incorrectly fitted or not tight enough. Fit cuff correctly and tighten.
• You have changed position or the cuff has moved during the measurement. Keep still and do not
move your arm or the cuff.
• You have an irregular heartbeat. Even if your heartbeat is only slightly irregular, repeat the
measurement. The unit is not suitable for people with an extremely irregular heartbeat.
• You have spoken during the measurement, you are nervous or you are excited. Do not speak and
breathe deeply two or three times in order to relax.
• You are not in the corrected seated position. Please assume the correct position when taking the
measurement.
• A problem occurred during inflation or during the measurement. Repeat the measurement.
"EE" appears in the display
• The unit has not been inflated enough. Repeat the measurement
• A problem occurred during inflation or during the measurement. Repeat the measurement.
No display or display locked
• No batteries have been inserted, batteries wrongly inserted or batteries are completely empty.
Insert batteries, check battery position or replace with new batteries.
• A malfunction or fault has occurred. Briefly remove the batteries and then replace them.
Please contact the service centre if the error message appears again when the measure-
ment is repeated.
appears in the display
GB

6 Miscellaneous

31