Medisana HGN User Manual page 13

3.2
1. With the unit switched off, simultaneously press the START button
Setting date
and time
2. Press the MEM button
3. Press the START button
4. Proceed in exactly the same manner as described in point 2 when entering the date, hours and
5. In each case, press the MEM button
6. The date and time are displayed continuously. If the batteries are changed the information is
to set the date and time. First of all the entry point for the month flashes (1, 2, 3... 12).
flashes.
minutes.
entry.
lost and the date and time must be set
repeatedly until the desired number for the month appears.
again to accept the setting. Now the entry point for the date
to select and the START button
again.
3 Getting Started
and the MEM button
to accept the
27
GB