Park Orbits; Private Lines - Samsung OfficeServ 100 General Description Manual

Paging
System software allows the use of four internal and four external paging zones. Stations can
page any individual zone, all internal zones, all external zones or all zones simultaneously.
Using system programming, each station may be allowed or denied the ability to make
and/or receive page announcements to any zone or combination of zones.

Park Orbits

The system has 10 park orbits (0–9). These orbits can be used to park calls prior to paging
and allows the call to be retrieved by dialling a park code plus the orbit number. Calls parked
in this manner can also be retrieved by dialling the Park Pickup code plus the station or trunk
number. This feature is in addition to Call Park and Page.
Prime Line Selection
Any station can be programmed to select a specific line, trunk group, telephone number, sta-
tion or station group when the handset is lifted or the Speaker key is pressed (same as the
Hot Line feature).

Private Lines

For private line use, stations can be prevented from dialling and/or answering any line.
Programmable Line Privacy (PRB Key)
Each outside line can be programmed to ignore automatic line privacy. This allows up to four
other parties to join your conversation by simply pressing a line key. (This is similar to 1A2
key telephone operation.)
Programmable Timers
There are over 50 programmable system timers to allow each installation to be customised to
best fit the end user's application.
Recalls
Calls put on hold, transferred or camped-on to any station will recall to the originating station
if not answered within a programmable time. A recall that goes unanswered for the duration
of the attendant recall timer will recall to the system operator group. Hold, transfer, camp-on
and attendant recalls have individual programmable timers. Calls recalling to keys with tri-
coloured LEDs will flash amber.
Remote Programming—PC
Remote programming allows you to access the system database from a remote location to
make changes to the customer database. You need an external modem, the optional internal
Modem card, or a Wide Area Network (WAN) connection and a PC running the OfficeServ
Manager program.
Ring Modes
The system can be programmed to allow calls to ring defined destinations based on ring plan
settings.
4-21