C A L L Park And Pa G; Retrieving Aparked Call; Setting Amessage Indicat I O - Samsung DCS User Manual

CALL PARK AND PAGE
When you have an outside call for someone who is not at his/her desk,
you can park the call and page the requested party:
• While in conversation, hookflash and dial 5 5. The call is automat-
ically parked at your station.
• Dial the desired page zone and make an announcement. Be sure
to include your station number, example, "Mr. Saint, park 201."
RETRIEVING A PARKED CALL
To retrieve a call that has been parked for you:
• Lift the handset.
• Dial 1 0 plus the station number that was announced. You will be
connected to the parked call.
SETTING A MESSAGE INDICATION
When you are calling another station and no one answers or you re c e i v e
a busy signal, you can set a message indication at that station. The M E S-
S A G E key on keysets will flash and standard telephones will re c e i v e
special dial tone.
• Hookflash and dial 4 3.
• Receive confirmation tone and hang up.
If the keyset you are calling is in the Auto Answer mode , you must use
the following pro c e d u re :
• Hang up for at least two seconds.
• Lift the handset.
• Dial 4 1 plus the extension number.
• Receive confirmation tone and then hang up.
NOTE: Astation can have up to and including five message indications.
If you receive dial tone instead of confirmation tone, there are
a l ready five messages at this station. Try again later.
18