Scanner Charging Led; Connecting To The Host Computer; Batch Connection; Bluetooth Connection: Development Options - Motorola CS3000 Manual

Scanner Charging LED

The scanner's LED indicates charging activity (see
during charging. The scanner's LED turns solid green when the battery is fully charged.

Connecting to the Host Computer

Batch Connection

See Charging the Scanner Battery on page 1-3
USB.
NOTE To enter batch scanning mode, the scanner cannot be paired to a Bluetooth host (applies to CS3070
model only).

Bluetooth Connection: Development Options

Serial Port Profile
This Bluetooth profile emulates a serial cable to provide a simply implemented wireless replacement for
existing RS-232 based serial communications applications, including familiar control signals. It is the preferred
communication profile implementation because accidental key strokes from the keyboard or touch screen on
the host are not entered into the bar code data stream.
Human Interface Device Emulation
This Bluetooth profile is a lightweight wrapper of the Human Interface Device protocol defined for USB. Data
transmitted from the Bluetooth scanner appears as keyboard entries to the Bluetooth host (Smartphone, PC,
etc).
NOTE Wedge data appears within whichever application has input focus.
Table 2-1 on page 2-3). The amber LED blinks slowly
for instructions on connecting the scanner to a host PC via
Getting Started 1 - 5