4 - 28 CS3000 Series Scanner Product Reference Guide
Code 93
Enable/Disable Code 93
Parameter # 0x09
To enable or disable Code 93, scan the appropriate bar code below.
Set Lengths for Code 93
Parameter # L1 = 0x1A, L2 = 0x1B
The length of a code refers to the number of characters (i.e., human readable characters), including check
digit(s) the code contains. Set lengths for Code 93 to any length, one or two discrete lengths, or lengths within
a specific range.
One Discrete Length - Select this option to decode only codes containing a selected length. For example,
select Code 93 One Discrete Length, then scan the bar codes 1, 4 from
limit the decoding to Code 93 symbols containing 14 characters. To change the selection or cancel an incorrect
entry, scan
Cancel on page
Enable Code 93
(0x01)
*Disable Code 93
(0x00)
4-50.
Code 93 - One Discrete Length
Numeric Bar Codes on page 4-48
to