4 - 44 CS3000 Series Scanner Product Reference Guide
MSI Check Digits
Parameter # 0x32
These check digits at the end of the bar code verify the integrity of the data. At least one check digit is always
required. Check digits are not automatically transmitted with the data.
If you select two check digits, also select an
Transmit MSI Check Digit
Parameter # 0x2E
Scan one of the following bar codes to select whether to transmit data with or without the check digit.
MSI Check Digit Algorithm on page
*One MSI Check Digit
(0x00)
Two MSI Check Digits
(0x01)
Transmit MSI Check Digit (Enable)
(0x01)
*Do Not Transmit MSI Check Digit (Disable)
(0x00)
4-45.