1 - 4
CS3000 Series Scanner Product Reference Guide
Charging via Charging Cradle
Insert the cradle's USB connector into a USB port on the host PC.
1.
Connecting Cradle to Host PC
Figure 1-5
Remove the protective cover from the scanner.
2.
Place the scanner in the cradle, ensuring the mini-USB connector in the cradle inserts into the interface
3.
port on the scanner.
Inserting Scanner in Cradle
Figure 1-6
The scanner begins charging. A complete charge of a fully discharged battery takes approximately three
hours. Charge within the recommended temperature of 32° to 104° F (0° to 40° C).