Canon WU10 User Manual page 35

[Wireless LAN Basic Configuration]
Name Details
Set the SSID of the wireless LAN
to connect this product.
The SSID is an ID that
distinguishes a wireless LAN
network from others. For wireless
SSID devices to communicate with each
other on a wireless network, they
must share the same SSID.
Up to 32 characters (including
hyphens (-) and underscores (_)
can be used.
Set the transmit power for
Tx Power
connecting to a wireless LAN.
Name
Default Value
WU10-xxxxxx
(xxxxxx is the
last 6 digits of
the Mac
address)
High
Network
Authentica-
tion
Details
Select the network authentication
mode that will be used to connect
to the wireless base station
(access point). Greatest security
can be obtained by using WPA/
WPA2. For IEEE 802.11n, only
AES can be used
• Open (Open System)
Allows all access without
authentication. For encryption
mode, WEP can be used.
• Shared (Pre-Shared Key)
Uses the WEP key for encryption
and allows access only from
devices with the same WEP key.
For encryption mode, WEP can
be used.
• WPA
Uses PSK for network
authentication. For encryption
mode, TKIP/AES can be
selected. The encryption key will
be generated by communicating
with your access point using a
pre-shared key. The WEP key
setting is not used for this mode.
• WPA2
Uses PSK for network
authentication. For encryption
mode, TKIP/AES can be
selected. The encryption key will
be generated by communicating
with your access point using a
pre-shared key. The WEP key
setting is not used for this mode.
Default Value
Open
35