Connecting Using Wps - Canon WU10 User Manual

Connecting using WPS

Using WPS, this device can connect to an existing wireless network having a WPS-equipped access point. The network mode of this device is set
to AP mode under factory default settings and must be switched to Station mode before using the WPS function.
CAUTION
• Even a WPS-equipped access point may have WPS disabled. Ensure WPS is enabled.
• If the access point is using security settings (such as MAC address filtering), change the settings to allow connection to this device.
• To ensure good Wi-Fi communications, perform this procedure with the scanner initially located close to the access point.
1
Slide the mode switch to the "ST" side, press the
power button to turn the device on.
14
Power button