Tcp/Ip; Tcp/Ip Configuration; Wins Configuration - Canon WU10 User Manual

TCP/IP

If you click [TCP/IP] on the left menu, the page below is displayed.
In this page, you can configure the IP address.

[TCP/IP Configuration]

Name Details
Enable/disable the DHCP protocol.
To assign an IP address using
DHCP
DHCP, the DHCP server must be
running in your subnetwork.
Set the IP address of this product.
If DHCP is enabled, the IP address
obtained from it will be applied.
IP Address The value must be four decimal
numbers separated by dots and
expressed in the [xxx.xxx.xxx.xxx]
format.
Name
Subnet
Mask
Default
Gateway
Default Value
ENABLE

[WINS Configuration]

Name
192.168.0.10
WINS
Server
Details
Set the subnet mask of this
product.
If DHCP is enabled, the subnet
mask obtained from it will be
applied.
The value must be four decimal
numbers separated by dots and
expressed in the [xxx.xxx.xxx.xxx]
format.
When set to "0.0.0.0", a subnet
mask appropriate for the IP
address is automatically used.
Set the IP address of the gateway.
If DHCP is enabled, the default
gateway obtained from it will be
applied.
The value must be four decimal
numbers separated by dots and
expressed in the [xxx.xxx.xxx.xxx]
format. Also, the gateway needs to
be running in the same subnetwork
as this product. If "0.0.0.0" is set,
this setting is disabled.
Details
Set the IP address of the WINS
server.
If the DHCP is enabled, the WINS
server address obtained from it will
be applied.
The value must be four decimal
numbers separated by dots and
expressed in the [xxx.xxx.xxx.xxx]
format.
Default Value
255.255.255.0
0.0.0.0
Default Value
0.0.0.0
31