Canon WU10 User Manual page 22

7
Configure settings in the Web configuration page for the device.
A Wireless LAN
A Click [Wireless LAN] under [Station Conf.].
B Enter the user name and password, then click [OK].
User name: root
Password: (none)
C Select one of [2.] to [5.] under [Wireless LAN Setting List].
D Configure the following settings according to the configurations of
the access point you are using.
SSID: Enter the SSID of the access point.
Network Authentication: Select the authentication method (Open,
Shared, WPA, etc.) configured for the access point you are using.
Depending on the authentication method, encryption key entry will be
required.
E Click [Submit].
If the following screen appears
Click [OK].
22
B Restart
F Close the Web browser.
G Confirm that the computer is correctly connected to the
wireless access point.
H Power off the device by pressing its power button.
I Slide the mode switch to the "ST" side, press the power
button to turn the device on.
J Confirm that the CONNECTION lamp is lit green and
then proceed to the next step.