JVC KD-AV7100 Instructions Manual page 53

Symptoms
• The iPod does not turn on or does not work.
• The sound is distorted.
• Playback stops.
• No sounds can be heard when connecting an
iPod nano.
• "No Files" appears on the monitor.
• The iPod's controls do not work after
disconnecting from this unit.
• "Cannot play" appears on the monitor.
• "NO VIDEO SIGNAL" appears on the monitor.
• Playback picture is not clear and legible.
• No sounds can be heard.
Remedies/Causes
• Check the connecting cable and its connection.
• Update the firmware version.
• Charge the battery.
Deactivate the equalizer either on this unit or the iPod.
The headphones are disconnected during playback. Turn off
the unit's power and turn on it again.
• Disconnect the headphones from the iPod nano.
• Update the firmware version of the iPod nano.
No tracks are stored. Import tracks to the iPod.
Reset the iPod.
Communication error occurs. Disconnect and connect the
cable to the iPod again.
• Turn on the video component if it is not on.
• Connect the video component correctly.
Adjust the monitor brightness. (☞page 11)
Check the connecting cable and its connection.
53
REFERENCES