Usb Operations - JVC KD-AV7100 Instructions Manual

USB operations

You can connect a USB mass storage class device such as a USB memory, Digital Audio Player, etc. to the unit.
This unit can play the JPEG/MPEG1/MPEG2*/MP3/WMA files stored in USB mass storage class device.
• You can operate the USB device in the same way you operate the files on discs. (☞ pages 17 to 28)
• Playback will stop after playing back all tracks in the USB mass storage class device.
• If you start playback again after changing the source or turning off the unit, the playback starts from the first track.
• Make sure all important data has been backed up.
* Except for MPEG2 files recorded by JVC Everio camcorder (extension code <.mod>).
~
~
Open the front cover.
Ÿ
Connect a USB mass storage class device.
!
Select "USB" for the source.
(☞ page 10)
• Open the monitor if necessary.
Caution:
• Avoid using the USB device if it might hinder your safety driving.
• Do not pull out and attach the USB device repeatedly while "Reading..." is displayed on the monitor screen.
• Do not start the car engine if a USB device is connected.
• Stop playback before disconnecting a USB device.
• Do not leave a USB device in the car, expose to direct sunlight, or high temperature to avoid deformation or
cause damages to the device.
• For more details about USB operations, ☞ page 49
Ÿ
You cannot connect a computer to
•
the USB (
33
) terminal of the unit.
OPERATIONS